- Top rated
- KIT
Description
This kit comes as a set of 2 Drinking Water Standards with Mercury for AA & ICP. The first bottle is EP-4 and the second bottle is EP-8. Assurance® Mixed Multi-Element Standards for AA. ICP Standards may be diluted in the same matrix as specified; however, caution must be exercised in the choice of the source for your diluents. Diluting the matrix may cause some standards to precipitate. Also, an impure or unknown diluent turns your standard into an unknown. We recommend using only SPEX CertiPrep Matrix Blanks when diluting your standards. These standards are for use with procedures for compliance monitoring of drinking water and for analysis of ground and surface water where determination of the drinking water contamination levels are required. Refer to US National Primary Drinking Water Regulations 40 CFR, Part 141.
Intended Use
Multi-element instument check standards for AA and ICP instrumentation
More Information
Accredited by A2LA to ISO/IEC 17025/2017 and ISO 17034:2016|Certified to DQS to ISO 9001:2015|Refer to US National Primary Drinking Water Regulations 40 CFR, Part 141
Product Information
- BrandSpex
- Volume125 mL
- Unit of MeasureEA
- Storage Condition15 to 30°C
- Product TypeInorganic Standard
- Raw MaterialFive 9s & Purification as available
- CertificationSingle: Direct ICP Analysis
Notifications
Component Table
| Barium | 100 µg/mL | 2% HNO3 | |
| Arsenic | 10 µg/mL | 2% HNO3 | |
| Chromium | 10 µg/mL | 2% HNO3 | |
| Lead | 10 µg/mL | 2% HNO3 | |
| Silver | 10 µg/mL | 2% HNO3 | |
| Cadmium | 5 µg/mL | 2% HNO3 | |
| Selenium | 5 µg/mL | 2% HNO3 | |
| Mercury | 10 µg/mL | 2% HNO3 | |
| Zinc | 500 µg/mL | 2% HNO3 | |
| Copper | 100 µg/mL | 2% HNO3 | |
| Iron | 30 µg/mL | 2% HNO3 | |
| Manganese | 5 µg/mL | 2% HNO3 |