Assurance® Instrument Check Standard 3 for AA & ICP (500 mL)

SKU: CALMIX3-500

Description

Assurance® Mixed Multi-Element Standards for AA & ICP Standards may be diluted in the same matrix as specified; however, caution must be exercised in the choice of the source for your diluents. Diluting the matrix may cause some standards to precipitate. Also, an impure or unknown diluent turns your standard into an unknown. We recommend using only SPEX CertiPrep Matrix Blanks when diluting your standards. Instrument Check (Lab Performance) Standards Used to calibrate and verify wavelength accuracy and stability in sequential and simultaneous ICP units. Each CAL-MIX is designed to give the user wavelength ranges from 160 nm to 790 nm. Every ICP manufacturer has a specific group of elements at varying concentrations to determine instrument accuracy and reliability. Some have special calibration programs incorporated into their software; others give you information in their manuals. These standards are also useful as training tools for technicians or for methods development. Check your ICP manual or service guide for more information.

Intended Use

Multi-element standards for AA & ICP instrumentation

More Information

Accredited by A2LA to ISO/IEC 17025/2017 and ISO 17034:2016|Certified to DQS to ISO 9001:2015|Calibrate and verify wavelength accuracy and stability in sequential and simultaneous ICP units

Documents

Safety Data Sheet

Product Information

BrandSpex
Volume500 mL
Unit of MeasureEA
Storage Condition15 to 30°C
Product TypeInorganic Standard
Raw MaterialFive 9s & Purification as available
CertificationSingle: Direct ICP Analysis

warning
This item has been deemed hazardous Additional shipping fees and permits may apply.

Component Table


Phosphorus	100 µg/mL	5% HCl
Potassium	100 µg/mL	5% HCl
Sulfur	100 µg/mL	5% HCl
Arsenic	20 µg/mL	5% HCl
Lanthanum	20 µg/mL	5% HCl
Lithium	20 µg/mL	5% HCl
Manganese	20 µg/mL	5% HCl
Molybdenum	20 µg/mL	5% HCl
Nickel	20 µg/mL	5% HCl
Scandium	20 µg/mL	5% HCl
Sodium	20 µg/mL	5% HCl