Skip to Main Content

Select country

Select your country

  • Top rated
Spex

Assurance® LPC Standard without Mercury for AA & ICP (125 mL)

SKU: LPC-1-100N

Description

Assurance® Mixed Multi-Element Standards for AA & ICP Standards may be diluted in the same matrix as specified; however, caution must be exercised in the choice of the source for your diluents. Diluting the matrix may cause some standards to precipitate. Also, an impure or unknown diluent turns your standard into an unknown. We recommend using only SPEX CertiPrep Matrix Blanks when diluting your standards. Laboratory Performance Check (LPC) Standards The Laboratory Performance Check (LPC) Standard is a solution of method analysis analytes used to evaluate the performance of the instrument. The LPC standard is used immediately following calibration, after every tenth sample, and at the end of the sample run. The analyzed value of each analyte in the LPC solution should be within 95% to 105% of its expected value. If the analyte value is outside of the interval, reanalyze the LPC. If the analyte is again outside of the +/- 5% limit, the instrument should be recalibrated and all samples following the last acceptable LPC solution should be reanalyzed.

Intended Use

Mixed multi-element standard for AA and ICP

More Information

Diluted in 5% HNO3/tr. Tartaric Acid/tr. HF|Use standard to check spectral interferences

Documents

Product Information

  • BrandSpex
  • Volume125 mL
  • Unit of MeasureEA
  • Storage Condition15 to 30°C
  • Product TypeInorganic Standard
  • Raw MaterialFive 9s & Purification as available
  • CertificationSingle: Direct ICP Analysis

Classification/Permits

  • CCL

    CCL

    International Customers only. This product is controlled through the U.S. Department of Commerce, Bureau of Industry and Security (BIS); a license authorizing export from the U.S. is required prior to shipment
    International Customers only. This product is controlled through the U.S. Department of Commerce, Bureau of Industry and Security (BIS); a license authorizing export from the U.S. is required prior to shipment

Notifications

  • warning
    This item has been deemed hazardous Additional shipping fees and permits may apply.
  • warning
    Shipping This product is not available for shipping outside of the US.

Component Table

Phosphorus 100 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Potassium 100 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Silica 100 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Aluminum 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Antimony 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Arsenic 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Barium 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Beryllium 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Boron 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Cadmium 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Calcium 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Chromium 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Cobalt 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Copper 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Iron 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Lead 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Lithium 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Magnesium 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Manganese 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Molybdenum 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Nickel 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Selenium 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Sodium 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Strontium 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Thallium 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Tin 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Vanadium 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Zinc 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Silver 5 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
AlertAlertBrowse fileDownload fileFileImagePdfWordTextExcelPowerpointArchiveCsvAudioVideoSpinnerCalendarReturn arrowMinusVisibleInvisibleVisibleInvisibleConfigure