Skip to Main Content

Select country

Select your country

Spex

Assurance® Mixed Calibration Standard 5A for AA & ICP (125 mL)

SKU: MIXSTD5A-100

Description

Assurance® Mixed Multi-Element Standards for AA & ICP Standards may be diluted in the same matrix as specified; however, caution must be exercised in the choice of the source for your diluents. Diluting the matrix may cause some standards to precipitate. Also, an impure or unknown diluent turns your standard into an unknown. We recommend using only SPEX CertiPrep Matrix Blanks when diluting your standards. AA & ICP Calibration Standards are provided for routine instrument calibration. The concentrations and matrices have been selected for convenience of use and stability. For use in US EPA Method 200.7 (Revision 4.4) and SW-846, Method 6010 (Third Edition).

Intended Use

Multi-element groundwater and wastewater pollution control check standards for AA & ICP analysis

More Information

Manufactured under ISO 9001, ISO/IEC 17025 and ISO 17034 compliance|For use in US EPA Method 200.7 (Revision 4.4) and SW-846, Method 6010 (Third Edition)

Product Information

  • BrandSpex
  • Volume125 mL
  • Unit of MeasureEA
  • Storage Condition15 to 30°C
  • Product TypeInorganic Standard
  • Raw MaterialFive 9s & Purification as available
  • CertificationSingle: Direct ICP Analysis

Notifications

  • warning
    This item has been deemed hazardous Additional shipping fees and permits may apply.

Component Table

Beryllium 10 µg/mL 5% HNO3
Nickel 20 µg/mL 5% HNO3
Thallium 50 µg/mL 5% HNO3
Iron 100 µg/mL 5% HNO3
Magnesium 100 µg/mL 5% HNO3
Lead 100 µg/mL 5% HNO3
AlertAlertBrowse fileDownload fileFileImagePdfWordTextExcelPowerpointArchiveCsvAudioVideoSpinnerCalendarReturn arrowMinusVisibleInvisibleVisibleInvisibleConfigure