Skip to Main Content

Select country

Select your country

Spex

Assurance® Interference Check Standard 18 with Mercury for AA & ICP (125 mL)

SKU: INTER18-100

Description

This kit comes as a set of 2 Assurance® Interference Check Standard 18 with Mercury for AA & ICP. The first bottle is INTER18-100N and the second bottle is PLHG2-1Y. Assurance® Mixed Multi-Element Standards for AA & ICP: Standards may be diluted in the same matrix as specified; however, caution must be exercised in the choice of the source for your diluents. Diluting the matrix may cause some standards to precipitate. Also, an impure or unknown diluent turns your standard into an unknown. We recommend using only SPEX CertiPrep Matrix Blanks when diluting your standards. Interference Check Standards: The Interference Check Standards are used to set or confirm that the correct background correction intervals have been set for sequential ICP spectrometers and that the proper inter-element correction factors are set for simultaneous ICP spectrometers. For use in US EPA Method 200.7 (Revision 4.4) and SW-846, Method 6010 (Third Edition).

Intended Use

Use these Interference Check Standards to set or confirm that the correct background correction intervals have been set for sequential ICP spectrometers and that the proper inter-element correction factors are set for simultaneous ICP spectrometers. Chemiclas are not intended for and should not be (i) used for medical, surgical or other patient oriented applications, or (ii) combined with any food product or ingested in any form. Can’t find the standards you are looking for? Spex CertiPrep®can make custom standards to meet your exact needs. Contact us for more information.

More Information

Set or confirm background correction intervals|Manufactured under ISO 9001, ISO/IEC 17025 and ISO 17034 compliance|For use in US EPA Method 200.7 (Revision 4.4) and SW-846, Method 6010 (Third Edition)

Product Information

  • BrandSpex
  • Volume2 x 125 mL
  • Units/Pack2
  • Unit of MeasureEA
  • Storage Condition15 to 30°C
  • Product TypeInorganic Standard
  • Raw MaterialFive 9s & Purification as available
  • CertificationSingle: Direct ICP Analysis

Notifications

  • warning
    This item has been deemed hazardous Additional shipping fees and permits may apply.

Component Table

Potassium 20,000 µg/mL 5% HNO3
Arsenic 1,000 µg/mL 5% HNO3
Lead 1,000 µg/mL 5% HNO3
Thallium 1,000 µg/mL 5% HNO3
Selenium 500 µg/mL 5% HNO3
Barium 300 µg/mL 5% HNO3
Cadmium 300 µg/mL 5% HNO3
Chromium 300 µg/mL 5% HNO3
Cobalt 300 µg/mL 5% HNO3
Copper 300 µg/mL 5% HNO3
Nickel 300 µg/mL 5% HNO3
Silver 300 µg/mL 5% HNO3
Vanadium 300 µg/mL 5% HNO3
Zinc 300 µg/mL 5% HNO3
Manganese 200 µg/mL 5% HNO3
Beryllium 100 µg/mL 5% HNO3
Mercury 100 µg/mL 5% HNO3
AlertAlertBrowse fileDownload fileFileImagePdfWordTextExcelPowerpointArchiveCsvAudioVideoSpinnerCalendarReturn arrowMinusVisibleInvisibleVisibleInvisibleConfigure