- Top rated
- KIT
Spex
Assurance® LPC Standard with Mercury for AA & ICP (500 mL)
SKU: LPC-1-500
Login to view pricing
Description
This kit comes as a set of 2 Assurance® LPC Standard with Mercury for AA & ICP. The first bottle is LPC-1-500N and the second bottle is PLHG2-1X. Assurance® Mixed Multi-Element Standards for AA & ICP: Standards may be diluted in the same matrix as specified; however, caution must be exercised in the choice of the source for your diluents. Diluting the matrix may cause some standards to precipitate. Also, an impure or unknown diluent turns your standard into an unknown. We recommend using only SPEX CertiPrep Matrix Blanks when diluting your standards. Laboratory Performance Check (LPC) Standards: The Laboratory Performance Check (LPC) Standard is a solution of method analysis analytes used to evaluate the performance of the instrument. The LPC standard is used immediately following calibration, after every tenth sample, and at the end of the sample run. The analyzed value of each analyte in the LPC solution should be within 95% to 105% of its expected value. If the analyte value is outside of the interval, reanalyze the LPC. If the analyte is again outside of the +/- 5% limit, the instrument should be recalibrated and all samples following the last acceptable LPC solution should be reanalyzed.
Intended Use
Mixed multi-element standard for AA and ICP
More Information
Diluted in 5% HNO3/tr. Tartaric Acid/tr. HF|Use standard to check spectral interferences
Documents
Product Information
- BrandSpex
- Volume500 mL
- Unit of MeasureEA
- Storage Condition15 to 30°C
- Product TypeInorganic Standard
- Raw MaterialFive 9s & Purification as available
- CertificationSingle: Direct ICP Analysis
Classification/Permits
-
CCL
CCL
International Customers only. This product is controlled through the U.S. Department of Commerce, Bureau of Industry and Security (BIS); a license authorizing export from the U.S. is required prior to shipment
Notifications
Component Table
| Phosphorus | 100 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Potassium | 100 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Silica | 100 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Aluminum | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Antimony | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Arsenic | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Barium | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Beryllium | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Boron | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Cadmium | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Calcium | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Chromium | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Cobalt | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Copper | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Iron | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Lead | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Lithium | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Magnesium | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Manganese | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Molybdenum | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Nickel | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Selenium | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Sodium | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Strontium | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Thallium | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Tin | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Vanadium | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Zinc | 20 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Silver | 5 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF | |
| Mercury | 100 µg/mL | 5% HNO3/tr. Tartaric Acid/tr. HF |