Assurance® Primary Drinking Water Metals with Mercury for AA & ICP (500 mL)

SKU: EP-8-500

Description

This kit comes as a set of 2 Assurance® Primary Drinking Water Metals with Mercury for AA & ICP. The first bottle is EP-8-500N and the second bottle is PLHG2-1AX. Assurance® Mixed Multi-Element Standards for AA & ICP: Standards may be diluted in the same matrix as specified; however, caution must be exercised in the choice of the source for your diluents. Diluting the matrix may cause some standards to precipitate. Also, an impure or unknown diluent turns your standard into an unknown. We recommend using only SPEX CertiPrep Matrix Blanks when diluting your standards. Drinking Water Pollutant Standards: These standards are for use with procedures for compliance monitoring of drinking water and for analysis of ground and surface water where determination of the drinking water contamination levels are required. Refer to US National Primary Drinking Water Regulations 40 CFR, Part 141.

Intended Use

Multi-element instument check standards for AA and ICP instrumentation

More Information

Accredited by A2LA to ISO/IEC 17025/2017 and ISO 17034:2016|Certified to DQS to ISO 9001:2015|Refer to US National Primary Drinking Water Regulations 40 CFR, Part 141

Documents

Safety Data Sheet

Product Information

BrandSpex
Volume500 mL
Unit of MeasureEA
Storage Condition15 to 30°C
Product TypeInorganic Standard
Raw MaterialFive 9s & Purification as available
CertificationSingle: Direct ICP Analysis

warning
This item has been deemed hazardous Additional shipping fees and permits may apply.

Component Table


Barium	100 µg/mL	2% HNO3
Arsenic	10 µg/mL	2% HNO3
Chromium	10 µg/mL	2% HNO3
Lead	10 µg/mL	2% HNO3
Silver	10 µg/mL	2% HNO3
Cadmium	5 µg/mL	2% HNO3
Selenium	5 µg/mL	2% HNO3
Mercury	10 µg/mL	2% HNO3