Skip to Main Content

Select country

Select your country

  • Top rated
Spex

ICP-MS Alternate Internal Standard 2, 100 µg/mL (100 ppm) (125 mL)

SKU: CL-ISM2-100

Description

Claritas PPT® Multi-Element Standards for ICP-MS SPEX CertiPrep Claritas PPT® standards are a class of Inorganic Certified Reference Standards designed specifically for today;s new generation of trace ICP and ICP-MS instrumentation. Based on extensive development, our chemists have formulated this line of high-purity standards for user convenience and stability. Our Claritas PPT® selection of standards includes a complete series of multi-element solutions, many designed for use with US EPA Methods. These solutions are made with the highest purity materials available and are tested on our state-of-the-art ICP-MS. SPEX CertiPrep Certified Reference Materials (CRMs) are manufactured under a quality system complying with the requirements of ISO 9001, ISO/IEC 17025 and ISO 17034. Internal Standards May be used to monitor and correct for changes that occur from differences between standards and samples. Since environmental samples often contain significant amounts of lithium, isotopically enriched 95% 6Li can be analyzed as an internal standard, avoiding the signal from the 7Li peak.

Intended Use

Multi-element standards for ICP-MS analysis

More Information

Monitor and correct for changes that occur from differences between standards and samples|Manufactured under ISO 9001, ISO/IEC 17025 and ISO 17034 compliance

Documents

Product Information

  • BrandSpex
  • Volume125 mL
  • Unit of MeasureEA
  • Storage Condition15 to 30°C
  • Product TypeInorganic Standard
  • Measured Impurities68 elements to ppb (product)
  • Raw MaterialFive 9s & Purification as available
  • CertificationDual: Wet Chem, ICP Direct & ICPMS Impurities

Classification/Permits

  • CCL

    CCL

    International Customers only. This product is controlled through the U.S. Department of Commerce, Bureau of Industry and Security (BIS); a license authorizing export from the U.S. is required prior to shipment
    International Customers only. This product is controlled through the U.S. Department of Commerce, Bureau of Industry and Security (BIS); a license authorizing export from the U.S. is required prior to shipment

Notifications

  • warning
    This item has been deemed hazardous Additional shipping fees and permits may apply.
  • warning
    Shipping This product is not available for shipping outside of the US.

Component Table

Bismuth 100 µg/mL 2% HNO3
Germanium 100 µg/mL 2% HNO3
Indium 100 µg/mL 2% HNO3
Lithium 6 100 µg/mL 2% HNO3
Lutetium 100 µg/mL 2% HNO3
Rhodium 100 µg/mL 2% HNO3
Scandium 100 µg/mL 2% HNO3
Terbium 100 µg/mL 2% HNO3
AlertAlertBrowse fileDownload fileFileImagePdfWordTextExcelPowerpointArchiveCsvAudioVideoSpinnerCalendarReturn arrowMinusVisibleInvisibleVisibleInvisibleConfigure