TRACE METALS (500ML)

SKU: WP-15-500N

Description

Standards may be diluted in the same matrix as specified; however, caution must be exercised in the choice of the source for your diluents. Diluting the matrix may cause some standards to precipitate. Also, an impure or unknown diluent turns your standard into an unknown. We recommend using only SPEX CertiPrep Matrix Blanks when diluting your standards. Refer to US EPA Methods Manual 600/4-79-020 "Methods for Chemical Analysis of Water and Wastes" Trace Metals 21I, 21II and 21III Methods. Can’t find the standards you are looking for? Spex CertiPrep®can make custom standards to meet your exact needs. Contact us for more information at [email protected] or call us at 732-549-7144.

Intended Use

Multi-element standards for AA and ICP analysis

More Information

Accredited by A2LA to ISO/IEC 17025/2017 and ISO 17034:2016|Certified to DQS to ISO 9001:2015|May be used either as standards or as a means to check the individual analysts accuracy and precision

Documents

Safety Data Sheet

Product Information

Brand Spex
Volume 500 mL
Unit of Measure EA
Storage Condition 15 to 30°C
Product Type Inorganic Standard
Raw Material Five 9s & Purification as available
Certification Single: Direct ICP Analysis

warning
This item has been deemed hazardous Additional shipping fees and permits may apply.

Component Table


Aluminum	500 µg/mL	5% HNO3
Vanadium	250 µg/mL	5% HNO3
Arsenic	100 µg/mL	5% HNO3
Beryllium	100 µg/mL	5% HNO3
Chromium	100 µg/mL	5% HNO3
Cobalt	100 µg/mL	5% HNO3
Copper	100 µg/mL	5% HNO3
Iron	100 µg/mL	5% HNO3
Lead	100 µg/mL	5% HNO3
Manganese	100 µg/mL	5% HNO3
Nickel	100 µg/mL	5% HNO3
Zinc	100 µg/mL	5% HNO3
Cadmium	25 µg/mL	5% HNO3
Selenium	25 µg/mL	5% HNO3